Placer Series · Production
Hy-G P40 Gold Concentrator
Alluvial Placer + Crushed Ore Duty – Ultra-Fine Gold Recovery – High-Capacity Production
- Max Capacity
- 120+ TPH
- Bowl Size
- 1016 mm (40 inch)
- Motor Power
- 25 HP
- Feed Size
- 6 mm (1/4")
- Recovery
- +95% of free gold between 6 mm and 44 micron (1/4" and 325 mesh)
Click any image to enlarge, or play the video. Use the thumbnails to view more angles.
Features & Benefits
Why this concentrator
- High-capacity production concentrator for alluvial placer and crushed gold ore; use as a single unit or in a bank.
- Recovers +95% of free gold between 6 mm and 44 micron (1/4″ to 325 mesh), including flat flake gold common in alluvial placer ore.
- Continuous concentration for up to 24 hours, producing high-grade concentrate at low total volume and reducing downtime.
- Concentrate can be upgraded with a Hy-G P12 or P5, or taken directly to the concentrating table for final clean-up.
- Uses no mercury or chemicals.
Standard Equipment
- Fluidized centrifugal concentrating bowl with retention rings
- Heavy-duty lifting eyes for ease of installation
- Fresh-water fluidization control
Specifications
| Overview | |
|---|---|
| Series | Placer Series |
| Category | Production |
| Bowl Size | 1016 mm (40 inch) |
| Capacity & Feed | |
| Max Capacity | 120+ TPH |
| Efficient Max Capacity | Approx. 60 TPH |
| Feed / Max Screen Size | 6 mm (1/4") |
| Recovery | +95% of free gold between 6 mm and 44 micron (1/4" and 325 mesh) |
| Drive | |
| Motor(s) / Power | One (25 HP) |
| Water & Concentrate | |
| Water Required | 1173 lpm at 241 kpa (310 gpm @ 35 PSI) |
| Concentrate Volume | 53 liters of Solids (approx. 14 gallons of Solids) |
| Weight & Dimensions | |
| Weight | 2,804 kg (6,182 lbs) |
| Dimensions | L 2.21 m (7 ft 3 in) | W 1.78 m (5 ft 10 in) | H 2.50 m (8 ft 2.25 in) |
| Price | Request Pricing |
Specifications are a general guide and subject to change. Imperial and metric values are both shown where available. Where a value is not listed, it is available on request.
Ideal For
- Medium to large-scale alluvial placer and crushed-ore gold wash plants
- Tailings re-processing to recover fines and ultra-fines missed by sluice boxes, jigs and other centrifuges
Downloads
Parts & Service
Genuine Hy-G bowl wear parts, seals and spares are available through Hy-G Concentrators. Our team supports installation, start-up and ongoing service for every concentrator we build.
Request a Quote
Tell us about your feed material and target capacity — we’ll recommend the right Hy-G concentrator and prepare a quotation.
Request a Quote — P40